Type 1+2+3 AC surge protector - 3-phase+N
DUT250VG-300/ZP/TNS
Part Number: 3597ZP
- Type 1+2+3, 3-phase surge protector
- Common and differential mode
- Very compact monobloc enclosure
- Iimp by pole/total : 25kA
- Internal disconnection, status indicator
- Optimized to TOV
- EN 61643-11, IEC 61643-11 and UL1449 ed.4 compliance
Datasheet
The DUT250VG is a compact and heavy duty Type 1+2+3 SPD, designed to be connected at the entrance of the electrical installation, on a 3-phase 230/400 V AC network.
The DUT250VG is a 3-phase SPD and provides a common and differential mode protection.
This SPD is built in a compact enclosure for DIN rail mounting
Select another reference:
| SPD type | 1+2+3 | |
| Network | 230/400 V 3-phase+N | |
| AC system | TNS | |
| Nominal line voltage | Un | 230/400 Vac |
| Max. AC operating voltage | Uc | 255 Vac |
| Temporary Over Voltage (TOV) Charasteristics - 5 sec. | UT | 335 Vac withstand |
| Temporary Over Voltage (TOV) Charasteristics - 120 mn | UT | 440 Vac withstand |
| Residual Current | Ipe | None |
| Operating current | Ic | None |
| Follow current | If | None |
| Nominal discharge current | In | 40 kA |
| Max. discharge current | Imax | 100 kA |
| Impulse current by pole | Iimp | 25 kA |
| Total lightning current | Itotal | 50 kA |
| Withstand on Combination waveform IEC 61643-11 | Uoc | 6 kV |
| Withstand on overvoltages IEEE C62.41.1 | 20 kV | |
| Specific energy by pole | W/R | 156 kJ/ohm |
| Connection mode(s) | L/N and L/PE | |
| Protection mode(s) | Common/Differential mode | |
| Residual voltage | Up-in | 1.1 kV |
| Protection level L/N | Up L/N | 1.5 kV |
| Protection level L/PE | Up L/PE | 1.5 kV |
| Admissible short-circuit current | Isccr | 50 000 A |
| Technology | VG | |
| SPD configuration | 3-phase+N | |
| Connection to Network | By screw terminals : 6-35 mm² / by bus | |
| Format | Multipolar modular box | |
| Mounting | Symmetrical rail 35 mm (EN60715) | |
| Housing material | Thermoplastic UL94 V-0 | |
| Operating temperature | Tu | -40/+85°C |
| Protection rating | IP20 | |
| Disconnection indicator | LED indicators | |
| Remote signaling of disconnection | Output on changeover contact | |
| Dimensions | See diagram |
| Standards compliance | IEC 61643-11 / EN 61643-11 / UL1449 ed.4 | |
| Certification | UL / EAC / TUV |
| Thermal disconnector | Internal | |
| Installation ground fault breaker | Type 'S' or delayed | |
| Fuses | Fuses type gG - 315 A |
