Type 2 AC surge protector - 3-phase

DAC40C-40-150
Part Number: 821510112
DAC40C-40-150
  • Compact 3-phase Type 2 surge protector
  • In : 20 kA
  • Imax : 40 kA
  • Common mode/differential
  • Pluggable module
  • Remote signaling option
  • EN 61643-11, IEC 61643-11 certified
  • UL1449 ed.5 compliance
Contact Us
The DAC40C Type 2 Compact plugable surge protectors (SPD) are intended to be connected at the TGBT or divisional panel level. Their compact format allows them to be installed in very small spaces. The DAC40C SPDs are available have a discharge capacity of 40 kA, in single-phase or 3-phase configuration and with various voltages in order to protect any type of networks. Based on varistance technology equipped with disconnector and associated indicator, these SPD ensure maximum protection efficiency, flow capacity and reliability.
Select another reference:
SPD type 2
Network 120/208 V
AC system TN
Max. AC operating voltage Uc 150 Vac
Temporary Over Voltage (TOV) Charasteristics - 5 sec. UT 180 Vac withstand
Temporary Over Voltage (TOV) Charasteristics - 120 mn UT 230 Vac disconnection
Residual Current Ipe < 1 mA
Follow current If None
Nominal discharge current In 20 kA
Max. discharge current Imax 40 kA
Total Maximum discharge current Imax Total 160 kA
Protection mode(s) L/PE and N/PE
Protection level N/PE Up N/PE 0.9 kV
Protection level L/PE Up L/PE 1.2 kV
Admissible short-circuit current Isccr 10 000 A
Network type AC
Technology MOV
SPD configuration 3-phase+Neutral
Connection to Network By screw terminals: L/N = 1.5-10mm² (16mm² rigid) or PE = 2.5-25mm² (35mm² rigid)
Format Plug-in modular box
Plugable Yes
Mounting Symmetrical rail 35 mm (EN 60715)
Housing material Thermoplastic UL94 V-0
Operating temperature Tu -40/+85°C
Protection rating IP20
Failsafe mode Disconnection from AC network
Disconnection indicator 2 mechanical indicators - Red/Green
Spare module(s) MDAC40C-40-150
Remote signaling of disconnection Option DAC40CS-40-150 : output on changeover contact
Dimensions See diagram - 2TE (EN43880)
Weight 0.223 kg
Standards compliance IEC 61643-11 / EN 61643-11 / UL1449 ed.5
Certification KEMA / EAC
Thermal disconnector Internal
Installation ground fault breaker Type 'S' or delayed
Fuses 50 A min. - 125 A max. - Fuses Type gG