Type 2 AC surge protector - 3-phase

DS43S-400

Part Number: 461423

Type 2 AC Multipolar surge protector
In: 20 kA
Imax total: 120 kA
Pluggable module for each phase
Remote signaling
EN 61643-11, IEC 61643-11, UL1449 ed.5

used mainly for primary protection of single and 4- phase networks at the main electrical panel. They provide common-mode or common and differential mode. This SPD is based on high energy varistor equipped with thermal disconnector and failure indicator, to comply with standards. The DS40 surge protectors are designed to be used in a multipolar configuration to protect single-phase, 3-phase or 3-phase+Neutral AC networks.They are sometimes associated with dedicated N/PE surge protector based on gas tube technology.

Select another reference:

Electrical Properties Mechanical Properties Norms Deconnector Schemas

Network		230/400 V 3-phase
AC system		IT
Nominal line voltage	Un	400 Vac
Max. AC operating voltage	Uc	440 Vac
Temporary Over Voltage (TOV) Charasteristics - 5 sec. Without disconnection	UT	580 Vac withstand
Temporary Over Voltage (TOV) Charasteristics - 120 mn Without disconnection or with safety disconnection	UT	770 Vac disconnection
Residual Current Leakage current to Ground	Ipe	< 1.5 mA
Operating current Continious current at Uc	Ic	0.5 mA
Follow current	If	None
Nominal discharge current 15 x 8/20 µs impulses	In	20 kA
Max. discharge current max. withstand @ 8/20 µs by pole	Imax	40 kA
Connection mode(s)		L/PE
Protection mode(s)		Common mode/Differential mode
Residuel voltage at 5 kA @ 5 kA (8/20µs)	Up-5kA	1.3 kV
Protection level L/PE @ In (8/20µs)	Up L/PE	1.8 kV
Residual voltage at 10 kA @ 8/20µs	Up-10kA	1.5 kV
Admissible short-circuit current	Isccr	25 000 A

SPD configuration		3-phase
Connection to Network		By screw terminals: 2.5-25mm² / by bus
Format		Plug-in modular box
Mounting		Symmetrical rail 35 mm (EN 60715)
Housing material		Thermoplastic UL94 V-0
Operating temperature	Tu	-40/+85°C
Protection rating		IP20
Failsafe mode		Disconnection from AC network
Disconnection indicator		1 mechanical indicator by pole
Spare module(s)		DSM40-400
Remote signaling of disconnection		Output on changeover contact
Weight		0.286 kg

Certification

TUV

Thermal disconnector		Internal
Installation ground fault breaker		Type 'S' or delayed
Fuses		Fuses type gG - 50 A

Description: Type 2 AC surge protector - 3-phase
Certification: TUV
SPD configuration: 3-phase
Remote signaling of disconnection: Output on changeover contact
Network: 230/400 V 3-phase
AC system: IT
Max. AC operating voltage : 440 Vac
Residual Current : < 1.5 mA
Max. discharge current : 40 kA
Admissible short-circuit current: 25 000 A

CITEL
Reference: DS43S-400
Part Number: : 461423
Or equivalent