DC power surge protector - 48 Vdc

DS2x0-DC surge protectors are designed to protect equipment connected to DC (and AC) power supplies from lightning surges. It is based on varistors matched to the network voltage: the varistors have thermal disconnection devices to control any end-of-life.These DIN rail SPD are connected in parallel to the equipment being protected.
Select another reference:
SPD type 2
Network DC or PV network 48Vdc
Nominal line voltage Un 48 Vdc
Nominal DC voltage Un-dc 48 Vdc
Nominal PV voltage Uocstc 48 Vdc
Max. AC operating voltage Uc 50 Vac
Max. PV operating voltage Ucpv 65 Vdc
Max. DC operating voltage Uc 65 Vdc
Max. load current IL 20 A
Residual Current Ipe < 0.1 mA
Operating current Ic < 0.1 mA
PV Permanent Operating current Icpv < 0.1 mA
Follow current If None
Nominal discharge current In 10 kA
Max. discharge current Imax 20 kA
Total Maximum discharge current Imax Total 40 kA
Current withstand short circuit PV Iscpv 1000 A
Connection mode(s) +/-/PE
Protection mode(s) Common mode/Differential mode
Protection level Up 400 V
Technology MOV
Connection to Network By screw terminals: 1.5-10mm² (actives wires) and 2.5-25mm² (ground)
Format Plug-in modular box
Mounting Symmetrical rail 35 mm (EN 60715)
Housing material Thermoplastic UL94 V-0
Operating temperature Tu -40/+85°C
Protection rating IP20
Outdoor application No
Failsafe mode Disconnection from DC network
Disconnection indicator 2 mechanical indicators
Spare module(s) DSM220-48DC
Remote signaling of disconnection Output on changeover contact
Dimensions See diagram
Standards compliance IEC 61643-11 / EN 61643-11 / UL1449 ed.5
Certification UL listed
Thermal disconnector Internal
Fuses Fuses type gG - 20A