RJ45 surge protector for CAT6 network
MJ8-C6
Part Number: 6184
- CAT6 networks surge protector
- 10/100/1000BaseT compatible
- RJ45 connector
- Bi-directional
Installation Sheet
The MJ8-C6 surge protector is designed to protect data processing equipment, connected to twisted pair Ethernet 10 to 1000 Mbit/s network Featured with in/out RJ45 connectors.
| Network |
10Gigabit Ethernet, Cat.6 cabling |
| Nominal line voltage |
5 Vdc |
| Max. DC operating voltage |
6 Vdc |
| Max. load current |
1000 mA |
| Max. data rate |
10 Gbps |
| Max. frequency |
> 250 MHz |
| Insertion loss |
< 1 dB |
| Protection level Following the test category C3 (IEC61643-21) - Line/Line |
20 V |
| Max. shunt capacitance | < 25 pF |
| Impulse current 2 x 10/350µs Test - D1 Category |
100 A |
| Line/Line Nominal discharge current 8/20µs Test x 10 - C2 Category |
100 A |
| Line/Ground Nominal discharge current 8/20µs Test x 10 - C2 Category |
100 A |
| Technology | Diode écrêtage |
| SPD configuration | 4 pairs |
| Connection to Network | RJ45 connector female input/output |
| Format |
Connector RJ45 |
| Mounting |
Mounting flange,Screw lug, DIN Rail |
| Housing material | Thermoplastic UL94-V0 |
| Operating temperature | -40/+85°C |
| Protection rating | IP20 |
| Failsafe behavior | Short-circuit |
| Disconnection indicator | Transmission interrupt |
| Pin outs | (1-2)(3-6)(4-5)(7-8) |
| Dimensions |
See diagram |
| Standards compliance |
IEC 61643-21 / EN 61643-21 / IEEE 802-3an |
