Surge protector for Video survey
MSP-VM48/RINJ
Part Number: 890193
- Security camera surge protector
- AC + Ethernet 100 Base-TX (connector RJ45)
- Compact aluminium housing
- Rail DIN mounting or plate
Datasheet
MSP-VMxx-R surge protectors were designed to protect video surveillance systems against transient overvoltages generated by lightning or industrial environment.
These devices protect, in a single compact housing, all the lines connected to the system: power supply (230Vac, 24Vdc, 12Vdc or 120 Vac),
dataline (6 or 8 Vdc).
This compact confi guration allows a fast installation in a small footprint.
Select another reference:
| Network | 4 pairs Ethernet 100 Base-TX | |
| Nominal line voltage | Un | 24 Vac/Vdc |
| Nominal DC voltage | Un-dc | 24 Vdc |
| Nominal PV voltage | Uocstc | 24 Vdc |
| Max. AC operating voltage | Uc | 50 Vac |
| Max. PV operating voltage | Ucpv | 38 Vdc |
| Max. DC operating voltage | Uc | 8 Vdc |
| Max. frequency | f max. | 125 MHz |
| Insertion loss | < 1dB | |
| Max. load current | IL | 5 A |
| Residual Current | Ipe | < 0.1 mA |
| Operating current | Ic | none |
| PV Permanent Operating current | Icpv | < 0.1 mA |
| Follow current | If | None |
| Nominal discharge current | In | 5 kA |
| Max. discharge current | Imax | 10 kA |
| Withstand on Combination waveform IEC 61643-11 | Uoc | 10 kV / 5 kA |
| Current withstand short circuit PV | Iscpv | 1000 A |
| Connection mode(s) | +/-/PE | |
| Protection mode(s) | Common/Differential mode | |
| Protection level | Up | 0.22 kV |
| Protection level | Up | 220 V |
| Protection level L/N | Up L/N | 0.22 kV |
| Protection level L/PE | Up L/PE | 20 V |
| Nominal discharge current | In | 2.5 kA |
| SPD configuration | 2 poles | |
| Connection to Network | screw terminal 2.5 mm² max | |
| Format | DIN rail or flange | |
| Mounting | DIN rail or plate (flange) | |
| Housing material | anodized aluminum | |
| Operating temperature | Tu | -40/+85°C |
| Protection rating | IP20 | |
| Failsafe mode | Disconnection and Power cut off | |
| Disconnection indicator | Green LED OFF and line cut-off | |
| Voltage/operating indicator | Green Led ON | |
| Spare module(s) | DSM220-24DC | |
| Remote signaling of disconnection | Output on changeover contact | |
| Weight | 0.111 kg |
| Certification | UL listed |
| Thermal disconnector | Internal | |
| Fuses | Fuses type gG - 20A |
