Surge protector for LED lighting system Class 1
MLP1-230L-W
MLP1-230L-W
Part Number: 711211
  • Type 2 or 3 surge protector
  • For LED lighting system
  • Class I
  • Very compact dimensions
  • Max. discharge current 10kA
  • EN 61643-11, IEC 61643-11 compliance
Installation Sheet

The MLP range is a comprehensive series of AC surge protectors dedicated to LED lighting system. Some versions are equipped with an extra dataline surge protection (RS485 or DALI) in order to provide a full solution for LED systems with transmission features. By this way the MLP range is able to provide all the existing configurations with an efficient solution . MLP surge protectors are based on a powerful association of MOV and GDT components, able to protect LED system against huge surges without disconnection. In the worse case, the SPD will fail in safety condition. Indication of the SPD failure is performed through power supply cut off and/or through remote signaling feature.


SPD type 2+3
Network 220-240 V single-phase
AC system TT-TN
Nominal line voltage Un 230-277 Vac
Max. AC operating voltage L-N Uc 305 Vac
Max. load current IL 2.5 A
Temporary Over Voltage (TOV) Charasteristics - 5 sec. UT 335 Vac withstand
Temporary Over Voltage (TOV) Charasteristics - 120 mn UT 440 Vac disconnection
Residual Current Ipe None
Follow current If None
Nominal discharge current In 5 kA
Max. discharge current Imax 10 kA
Total Maximal discharge current Imax Total 20 kA
Withstand on Combination waveform IEC 61643-11 Uoc 10 kV / 5 kA
Withstand on overvoltages IEEE C62.41.1 10 kV / 10 kA
Protection mode(s) Common/Differential mode
Protection level Up 1.5 kV
Protection level L/N Up L/N 1.5 kV
Protection level L/PE Up L/PE 1.5 kV
Protection level CM/DM Up mc/md 1.5 kV / 1 kV
Admissible short-circuit current Isccr 10 000 A
Technology MOV+GDT
Mounting On plate
Housing material Thermoplastic UL94-V0
Operating temperature -40/+85°C
Protection rating IP20
Failsafe mode Disconnection and AC line cut-off
Disconnection indicator Green Led OFF and AC line cut-off
Voltage/operating indicator Green Led ON
Remote signaling of disconnection No
Dimensions See diagram
Weight 0.109 kg
Standards compliance IEC 61643-11 / EN 61643-11 / UL1449 4ed.