Surge and Electrostactic protector for Class II LED lighting system
MLPC2-230L-V/ESP2
Part Number: 832227
- Type 2 (or 3) Surge & Electrostatic protectors
- For Class II Led lighting
- Improved coordination with internal MOV
- Electrostatic protection included
- Comply class II safety rules
- Very compact
- Plate mounting
- Screw terminal connection
- Status indicator
- End of life AC Disconnection
- IEC 61643-11 and EN 61643-11 compliance
Select another reference:
SPD type | 2+3 | |
Network | 220-240 V single-phase | |
AC system | TT/TN | |
Max. AC operating voltage | Uc | 320 Vac |
Max. load current | IL | 5 A |
Temporary Over Voltage (TOV) Charasteristics - 5 sec. | UT | 335 Vac withstand |
Temporary Over Voltage (TOV) Charasteristics - 120 mn | UT | 440 Vac disconnection |
Residual Current | Ipe | None |
Nominal discharge current | In | 5 kA |
Max. discharge current | Imax | 10 kA |
Total Maximum discharge current | Imax Total | 20 kA |
Withstand on Combination waveform IEC 61643-11 | Uoc | 10 kV |
Withstand on overvoltages IEEE C62.41.1 | 10 kV / 10 kA | |
Protection level | Up | 1.5 kV |
Admissible short-circuit current | Isccr | 10 000 A |
Electrostatic protection level | Uesp | >0.5 kV |
Electrostatic protection mode | N/Functional Earth |
Connection to Network | 2 screw terminals opposite side in/out - wire 2.5 mm² max. | |
Mounting | On plate | |
Housing material | Thermoplastic UL94 V-0 | |
Operating temperature | Tu | -40/+85°C |
Protection rating | IP20 | |
Failsafe mode | Disconnection and AC line cut-off | |
Disconnection indicator | Led green OFF and AC network cut-off | |
Voltage/operating indicator | Green Led ON | |
Dimensions | See diagram | |
Weight | 0.042 kg |
Standards compliance | EN 61643-11 / IEC 61643-11 | |
Certification | EAC |
Thermal disconnector | Internal | |
Installation ground fault breaker | Type 'S' or delayed |