Coaxial surge protector DC-3.5 GHz

P8AX15-NWSMA/FF
Part Number 611728
P8AX15-NWSMA/FF
  • RF coaxial surge protector
  • 3.5 GHz
  • Connectors: N/SMA
  • Low insertion loss
  • Removale GDT
  • DC-pass
  • Bi-directional protection

The P8AX series is based on gas discharge tube (GDT) and designed for RF line surge protection. Available for different power and with coaxial connectors, P8AX units could be provide in feedthrough mounting version and with various impedance.


Max. DC operating voltage
Uc 120 Vdc
Frequency range
f DC-3.5 GHz
Insertion loss
< 0.2 dB
Return loss
> 20 dB
Impedance
50 ohms
VSWR
<1.2:1
Max. load current
@25°C
IL 10 A
Residual Current
Leakage current to Ground
Ipe None
Max. discharge current
max. withstand @ 8/20 µs by pole
Imax 20 kA
Protection mode(s)
Common mode
Protection level
@1kV/µs (C3)
Up < 700 V
Impulse current
2 x 10/350µs Test - D1 Category
Iimp 1 kA
Nominal discharge current
C2 Category
In 5 kA
Max Power
70 W
Typical let through energy
(50 ohms) input 4kV 1.2/50μs - 2kA 8/20μs
320 µJ
DC Pass
Yes
Insulation resistance
IR ≥10 GOhms
Technology
Gas discharge tube
Connection to Network
Connector N Female/SMA Female
Mounting
Feedthrough
Housing material
Brass/Surface plating: Cu Zn Sn
Operating temperature
Tu -40/+85°C
Protection rating
IP65
Outdoor application
Yes
Failsafe mode
Short-circuit
Disconnection indicator
Transmission interrupt
Spare module(s)
BBHF-150V
Dimensions
See diagram
Contacts
Bronze/Surface Au-Ag
Standards compliance
IEC 61643-21 / EN 61643-21 / UL497E
RohS compliance
Yes