Ultra Compact Type 2 hard wired surge protector

MSB6-24/LD
Part Number: 561313
MSB6-24/LD
  • Ultra compact type 3 surge protector
  • 24 Vac or 24 Vdc version available
  • LED indicator
  • IP20
  • EN 61643-11, IEC 61643-11, UL1449 ed.5 compliance
Contact Us
MSB6 surge protectors Type 3 are designed for effective protection of sensitive equipment, in addition to the surge protector installation (coordination surge protector). These surge protectors utilize a ultra compact and economica scheme based varistors, to obtain a power flow relevant for secondary protection. The operating condition of the arrester is signaled by buzzer.
Select another reference:
SPD type 3
Network 24 Vac - 30 Vdc
Nominal line voltage Un 24 V
Max. AC operating voltage Uc 30 Vac
Max. DC operating voltage Uc 38 Vdc
Temporary Over Voltage (TOV) Charasteristics - 5 sec. UT 36 Vac withstand
Temporary Over Voltage (TOV) Charasteristics - 120 mn UT 42 Vac disconnection
Operating current Ic None
Follow current If None
Nominal discharge current In 0.5 kA
Max. discharge current Imax 2 kA
Withstand on Combination waveform IEC 61643-11 Uoc 1 kV
Protection mode(s) Common/Differential mode
Protection level L/N Up L/N 0.18 kV
Protection level L/PE Up L/PE 0.18 kV
Admissible short-circuit current Isccr 3 000 A
Technology MOV
Connection to Network Wires
Mounting AC outlet or screw terminal
Housing material Thermoplastic UL94 V-0
Operating temperature Tu -40/+85°C
Protection rating IP20
Failsafe mode Disconnection from AC network
Disconnection indicator Green LED OFF
Voltage/operating indicator Green Led ON
Dimensions See diagram
Weight 0.022 kg
Standards compliance IEC 61643-11 / EN 61643-11 / UL1449 ed.5
Certification EAC
Thermal disconnector Internal
Installation ground fault breaker Type 'S' or delayed