Coaxial surge protector for video transmission networks
CNP06 F/FF
Part Number: 632602
- Coaxial surge protector
- Multiples connectors
- Low insertion loss
- Easy installation
Datasheet
CNP surge protectors are designed to protect sensitive equipment, connected to coaxial lines as computer networks, video-transmission, against transient surge voltages and disturbances created by lightning.
Select another reference:
| Network | coaxial DC-100 MHz | |
| Nominal line voltage | Un | 5 V |
| Max. DC operating voltage | Uc | 10 V |
| Max. frequency | f max. | DC-100 MHz |
| Insertion loss | ≤ 0.5 dB | |
| Return loss | ≥20 dB | |
| Impedance | 50/75 ohms | |
| VSWR | < 1.3:1 | |
| Max. load current | IL | 0.5 A |
| Operating current | Ic | None |
| Max. discharge current | Imax | 20 kA |
| Protection mode(s) | Common mode | |
| Protection level | Up | 20 V |
| Protection level L/N | Up L/N | 20 V |
| Protection level L/PE | Up L/PE | 20 V |
| Impulse current | Iimp | 2.5 kA |
| Nominal discharge current | In | 5 kA |
| Max Power | 4 W | |
| DC Pass | ZERTZAERTZERTZER | False |
| Technology | GDT + Diode | |
| Connection to Network | Connector F Female/Female | |
| Format | Insulating box | |
| Mounting | On plate | |
| Housing material | Metal+plastic | |
| Operating temperature | Tu | -40/+85°C |
| Protection rating | IP20 | |
| Failsafe mode | Short-circuit - transmision cut-off - fault mode 2 | |
| Disconnection indicator | Transmission interrupt | |
| Dimensions | See diagram |
| Standards compliance | IEC 61643-21 / EN 61643-21 / UL497C / UL497E |
