Compact Type 2 hard wired surge protector

2-port MLPCA1-230L-2L
Part Number 835285
2-port MLPCA1-230L-2L
  • Compact type 2+3 surge protection
  • For equipment of protection class I
  • Simple installation due to two-port design
  • Fully encapsulated housing with rubber tubing (IP65)
  • Status signalling
  • Device defect disconnection from the mains and current circuit disconnection
  • Complies with IEC 61643-11 and EN 61643-11 standards
  • Particularly suitable for end circuits: e.g. LED lighting with additional protection of a control phase

MSB10 surge protectors Type 2 (or 3) are designed for effective protection of sensitive equipment, in addition to the surge protector installation (coordination surge protector). These surge protectors utilize a compact and economica scheme based varistors, to obtain a power flow relevant for secondary protection.


SPD type
IEC

2+3

Network

220-240 V Single-phase

AC system

TT-TN

Nominal line voltage
Un

230 V

Max. AC operating voltage
Uc

320 Vac

Max. load current @25°C
IL

10 A

Temporary Over Voltage (TOV) Characteristics - 5 sec.
Without disconnection
UT

335 Vac withstand

Temporary Over Voltage (TOV) Characteristics - 120 mn
Without disconnection or with safety disconnection
UT

440 Vac disconnection

Operating current
Continious current at Uc
Ic

< 1 mA

Follow current
If

None

Nominal discharge current
15 x 8/20 µs impulses
In

5 kA

Max. discharge current
max. withstand @ 8/20 µs by pole
Imax

10 kA

Total Maximum discharge current
max. total withstand @ 8/20 µs
Imax Total

30 kA

Withstand on Combination waveform IEC 61643-11
Class III test: 1.2/50µs - 8/20µs
Uoc

10 kV

Withstand on overvoltages IEEE C62.41.1

10 kV / 10 kA

Protection mode(s)

Common/Differential mode

Protection level
@ In (8/20µs)
Up

1.5 kV

Protection level L/N
@ In (8/20µs)
Up L/N

1.5 kV

Protection level L/PE
@ In (8/20µs)
Up L/PE

1.5 kV

Admissible short-circuit current
Isccr

10 000 A

Technology

MOV+GDT

Connection to Network

4-wire rubber hose line 1.5mm² (in/out)

Mounting

Wall or plate

Housing material

Thermoplastic UL94 V-0

Operating temperature
Tu

-40/+85°C

Protection rating

IP65

Failsafe mode

Disconnection and AC line cut-off

Disconnection indicator

LED green OFF and AC network cut-off

Operating indicator

Green Led ON

Dimensions

See diagram

Weight

0.152 kg

Standards compliance

IEC 61643-11 / EN 61643-11 / UL1449 ed.5

Certification

CE / UKCA

Thermal disconnector

Internal

Installation ground fault breaker

Type 'S' or delayed