Ultra Compact Type 2+3 hard wired surge protector for class II

MLPX2-275LN-W
Part Number 713567
MLPX2-275LN-W
  • Ultra compact Type 2+3 hard wired surge protectors
  • Lin/Nin and Lout/Nout
  • Wall mounting and hard wired connection
  • Bracket breakable
  • Protection rating : IP67
  • Disconnection signaling by indicator
  • AC disconnection in case of end of life
  • EN 61643-11, IEC 61643-11 and UL1449 5ed. compliance
Contact Us
SPD type
2+3
Network
 230-277 V Single-phase
AC system
 TT-TN
Nominal line voltage
 Un 230 V
Max. AC operating voltage
Uc 275 Vac
Max. load current
@25°C
 IL 10 A
Temporary Over Voltage (TOV) Characteristics - 5 sec.
Without disconnection
 UT 335 Vac withstand
Temporary Over Voltage (TOV) Characteristics - 120 mn
Without disconnection or with safety disconnection
 UT 440 Vac disconnection
Temporary Over Voltage N/PE (TOV HT)
Without disconnection or with safety disconnection
 UT 1200 V/300A/200 ms disconnection
Residual Current
Leakage current to Ground
 Ipe None
Nominal discharge current
15 x 8/20 µs impulses
 In 5 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
 Imax 10 kA
Total Maximum discharge current
max. total withstand @ 8/20 µs
Imax Total 20 kA
Withstand on Combination waveform IEC 61643-11
Class III test: 1.2/50µs - 8/20µs
 Uoc 10 kV
Withstand on overvoltages IEEE C62.41.1
 10 kV / 10 kA
Protection mode(s)
 Differential Mode
Protection level L/N
@ In (8/20µs)
 Up L/N 1.5 kV
Admissible short-circuit current
 Isccr 10 000 A
Technology
 MOV
Connection to Network
 By solid wires: 0.75mm²
Mounting
 Wall or plate
Housing material
 Thermoplastic UL94 V-0
Operating temperature
 Tu -40/+85°C
Protection rating
 IP67
Failsafe mode
 Disconnection and AC line cut-off
Disconnection indicator
 LED green OFF and AC network cut-off
Voltage/operating indicator
 Green Led ON
Dimensions
 See diagram
Weight
 0.040 kg
Standards compliance
 IEC 61643-11 / EN 61643-11 / UL1449 ed.5
Thermal disconnector
 Internal
Installation ground fault breaker
 Type 'S' or delayed