Type 2+3 PV surge protector - VG and CTC Technology

DPVN40CS-21Y-1500
Part Number 65112103
DPVN40CS-21Y-1500

NEW CITEL PV SPD

  • Type 2+3 surge protector for Photovoltaic
  • CTC Technology
  • Discharge currents Imax/Itotal: 40/60 kA (8/20µs)
  • Common/Differential mode protection
  • Remote signaling
  • IEC 61643-31, EN 61643-31, EN 50539-11, UL1449 ed.5 compliance
  • Certified EN 61643-31 and IEC 61643-31
Contact Us
The DPVN40 is CITEL's new series of type 2+3 SPDs for photovoltaic applications. Based on CITEL's patented CTC Technology, the DPVN40 incorporates a thermosensitive separation point placed at the center of the SPD guaranteeing the safest disconnection on the market. The products are designed to be mounted on a DIN rail. Compact and equipped with a failure indicator, these products are easy to install and maintain.
Select another reference:
SPD type
2+3
Network
 PV 1500 Vdc
Nominal PV voltage
 Uocstc 1250 Vdc
Max. PV operating voltage
 Ucpv 1500 Vdc
Residual Current
Leakage current to Ground
 Ipe < 0.1 mA
PV Permanent Operating current
Current consumption at Ucpv
 Icpv < 0.1 mA
Follow current
If None
Nominal discharge current
15 x 8/20 µs impulses
 In 20 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
 Imax 40 kA
Withstand on Combination waveform IEC 61643-11
Class III test: 1.2/50µs - 8/20µs
 Uoc 6 kV
Current withstand short circuit PV
 Iscpv 15 000 A
Connection mode(s)
 +/-/PE
Protection level +/-
@ In (8/20µs)
 Up 4.8 kV
Protection level +/PE (-/PE)
@ In (8/20µs)
 Up 4.6 kV
Protection level at 5 kA
@ 5 kA (8/20µs)
 Up 4,0 kV
Protection level at Uoc
@ Uoc (1.2/50 µs)
 Up 3,5 kV
Technology
 MOV
Connection to Network
 By screw terminals: 2.5-25mm² (35mm²) / by bus
Format
 Compact monobloc box
Plugable
 No
Mounting
 Symmetrical rail 35 mm (EN 60715)
Housing material
 Thermoplastic UL94 V-0
Operating temperature
 Tu -40/+85°C
Protection rating
 IP20
Failsafe mode
 All pole disconnection from PV network
Disconnection indicator
 1 mechanical indicator - Red/Green
Remote signaling of disconnection
 Output on changeover contact
Max. Voltage/Current for remote signaling
 250 V / 0.5 A (AC) / 30 V / 3 A (DC)
Dimensions
 See diagram - 2.5TE (EN43880)
Standards compliance
 IEC 61643-31 / EN 61643-31 / EN 50539-11 / UL1449 ed.5
Certification
 KEMA
Thermal disconnector
 CTC Technology integrated
Back-up protection device
Without