1-pair '5pins' plug-in surge protector
DP80-TW
Part Number: 85126
- Surge protector '5-pin' configuration
- 1-pair
- Fast installation with no wiring modification
- Fast maintenance
- For analog or high speed telecom lines
Datasheet
The DP80-TW is designed to protect large telephone equipment (PBXs, central offices) against lightning surges. This protection is based in hybrid protection diagram and in K20 configuration.
The DP80-TW is a one-pair plug-in module that uses the 5-pin configuration, and so can be adapted to CITEL TC99 and similar 100-pair connector block.
Select another reference:
| Network | RTC, ADSL | |
| Nominal line voltage | Un | 150 V |
| Max. DC operating voltage | Uc | 170 V |
| Max. frequency | f max. | > 10 MHz |
| Insertion loss | < 1 dB | |
| Max. load current | IL | 100 mA |
| Nominal discharge current | In | 5 kA |
| Max. discharge current | Imax | 10 kA |
| Protection mode(s) | Common/Differential mode | |
| Protection level | Up | 700 V |
| Protection level | Up | 700 V |
| Max. capacitance | C | < 70 pF |
| Nominal discharge current | In | 5 kA |
| Line/Line Nominal discharge current | In L/L | 5 kA |
| Line/Ground Nominal discharge current | In L/PE | 5 kA |
| Technology | GDT+CTP | |
| SPD configuration | 1 pair | |
| Connection to Network | '5-pin' plug-in | |
| Format | 1-pair plug-in box | |
| Mounting | on '5-pin' connector block | |
| Housing material | Thermoplastic UL94 V-0 | |
| Operating temperature | Tu | -40/+85°C |
| Protection rating | IP20 | |
| Failsafe mode | Short-circuit | |
| Disconnection indicator | Transmission interrupt | |
| Remote signaling of disconnection | No | |
| Dimensions | See diagram |
| Standards compliance | IEC 61643-21 / EN 61643-21 |
