19'' patch panel surge protector - POE-B line
PCH12-POE-B
Part Number: 6276
  • 19'' patch panel surge protector for POE-B
  • 12 ports
  • In : connector type 110 back
  • Out : RJ45 front
  • Maintenance possible per port
  • Secondary protection
  • UL497B

The PCH series protects 12, 24 and 48 ports, 19''rack mounted protection units that feature 110 punchdow to RJ45 connectors. This series feature CAT6 perfomance for todays's high speed data networks. These products are also available in configurations that offer surge protection to Telco and ISDN circuits.



Network
POE mode B, Gigabit Ethernet, POE Plus
Nominal line voltage
5 Vdc/48 Vdc
Max. DC operating voltage
Pin 1.2.3.6 : 7.5 Vdc - Pin 4.5.7.8 : 60 Vdc
Max. load current
750 mA
Max. data rate
1000 Mbps
Max. frequency
> 100 MHz
Insertion loss
< 1 dB
Protection level
Following the test category C3 (IEC61643-21) - Line/Line
20 V/ 80 V
Max. shunt capacitance < 8 pF (lignes ethernet)
Discharge current
at 10/1000µs impulse current
130 A / 50 A
Line/Line Nominal discharge current
8/20µs Test x 10 - C2 Category
600 A/250 A
Line/Ground Nominal discharge current
8/20µs Test x 10 - C2 Category
600 A/250 A
Technology Diode écrêtage
SPD configuration 12 ports de 8 wires
Connection to Network Self-stripping connector 110 back/RJ45 female. front
Format
Rack 19''
Mounting
Baie 19''
Housing material Aluminium
Operating temperature -40/+85°C
Protection rating IP20
Outdoor application
False
Failsafe behavior Short-circuit
Disconnection indicator Transmission interrupt
Spare module(s)
removable circuit 2 ports
Remote signaling of disconnection
no
Pin outs (1-2)(3-6)(4-5)(7-8)
Dimensions
See diagram
Standards compliance
IEC 61643-21 / EN 61643-21 / UL497B / IEEE 802-3at