10 gigabit POE ++ surge protector

CWMJ8-POE-C6A
Part Number 581544
CWMJ8-POE-C6A
  • POE++ Compatible (IEEE 802.3bt) -10Gb (5-100m) with Cat6A S/FTP cabling
  • Shielded RJ45 connectors
  • Outdoor applications, IP66 (NEMA 4/4X)
  • Plastic enclosure, UL94-V0
  • Conforms to IEC/EN 61643-21
  • SPD categories D1, C3, C2, C1
Contact Us
The new CWMJ8-POE-C6A product is designed to protect POE ++ and Ethernet Category 6A networks. The product is equipped with RJ45 shielded connectors for fast wiring. It completes the existing range of CITEL PoE surge protectors (CRMJ8-POE-C6A with metal enclosure, for outdoor application & MJ8-POE-C6A for indoor use). Based on hybrid diagram made with gas tubes and low capacitance clamping diodes, this surge protector is ideally suited for PoE-connected devices as IP cameras or WiFi hotspots. The product is designed for wall mounting and outdoor application, notably through his protection rating (IP66) and its UV rated thermoplastic (UL94-V0). Note, thanks to its design and modern appearance the product can also be installed indoor.
Select another reference:
Network
 10Gb/s on Cat6A S/FTP cabling
Protection modes (network)
 CM / DM
Protection modes (POE)
 CM / DM (common mode / differential mode)
Transmission standard
 IEEE 802.3bt
Lightning Protection Zones (LPZ)
 0 - 3
Max. DC operating voltage
 Uc 8 Vdc
Max. operating voltage (POE)
 Uc 60 Vdc
Max. frequency
 f max. 500 MHz
Max. data rate
 10 Gbps
Max. load current @25°C
 IL 2 A
Max. POE power (4PPOE)
 90 W
Max. discharge current
max. withstand @ 8/20 µs, X-C (Line/Earth)
 Imax 2 kA
Max. discharge current
max. withstand @ 8/20 µs, 8X-C (1&2+3&6+4&5+7&8 to Earth)
 Imax Total 16 kA
Protection Level
C3 (10/1000μs), 300 applications@10 A, X-X (Line/Line)
 Up < 20 V
Protection level
C3 (10/1000μs), 300 applications@10 A, X-C (Line/Earth)
 Up < 70 V
Protection Level
C3 (10/1000µs), 300 applications @ 10A, (Pair-Pair, POE)
 Up < 100 V
Impulse current
D1 (10/350μs), 2 applications, X-C (Line/Earth)
 Iimp 500 A
Nominal discharge current
C1 (1.2/50us / 8/20µs), 300 applications X-X (Line/Line)
 In 1kV / 500A
Nominal discharge current
C1 (1.2/50us / 8/20µs), 300 applications, X-C (Pair-Pair, POE)
 In 200 V / 100 A
Nominal discharge current
C2 (1.2/50us / 8/20µs), 10 applications X-C (Line/Earth)
 In 4 kV / 2 kA
Line resistance (± 10%)
 ~ 0 ohms
Capacitance
@1MHz, X-C (Line/Earth)
 C < 5 pF
Technology
 GDT+TVS diode
SPD configuration
 8 wires+shielded
Connection to Network
 RJ45 shielded connectors Female input/output
Cable glands
 Plastic/Rubber
Format
 Plastic Enclosure with connectors input/output
Mounting
 Wall / Plate
Housing material
 Thermoplastic UL94 V-0
Operating temperature
 Tu -40/+85°C
Ingress Protection rating
 IP66 (NEMA 4/4X)
Outdoor application
 Yes
Failsafe mode
 Transmission cut-off - Fault mode 2 (short-circuit)
Pinout
 (1-2)(3-6)(4-5)(7-8)
Dimensions
 See diagram
Weight
 0.29 kg / 0.64 lbs
Standards compliance
 IEC 61643-21 / EN 61643-21 / UL497B / IEEE 802.3af/3at/3bt, ANSI/TIA-568-c.1
UL Category
 QVGQ - Isolated Loop Circuit Protectors
UL File Number
 E184939
Certification
 UL 497B