AC/Data surge protector for Led lighting system Class 2

Part Number: 721221
  • Type 2 or 3 surge protector
  • For LED lighting system
  • Class II
  • Very compact dimensions
  • Max. discharge current 10kA
  • EN 61643-11, IEC 61643-11 compliance

The MLP range is a comprehensive series of AC surge protectors dedicated to LED lighting system. Some versions are equipped with an extra dataline surge protection (RS485 or DALI) in order to provide a full solution for LED systems with transmission features. By this way the MLP range is able to provide all the existing configurations with an efficient solution . MLP surge protectors are based on a powerful association of MOV and GDT components, able to protect LED system against huge surges without disconnection. In the worse case, the SPD will fail in safety condition. Indication of the SPD failure is performed through power supply cut off and/or through remote signaling feature.

SPD type 2+3
Network 220-240 V Single-phase
Network DALI
AC system TT-TN
Nominal line voltage Un 230-277 Vac
Nominal line voltage Un 12 V
Max. AC operating voltage Uc 305 Vac
Max. AC operating voltage Uc 15 Vac
Max. frequency f max. 10 MHz
Max. frequency f max. 10 MHz
Insertion loss < 1dB
Max. load current IL 300 mA
Max. load current IL 2.5 A
Temporary Over Voltage (TOV) Charasteristics - 5 sec. UT 335 Vac withstand
Temporary Over Voltage (TOV) Charasteristics - 120 mn UT 440 Vac disconnection
Residual Current Ipe None
Follow current If None
Nominal discharge current In 5 kA
Nominal discharge current In 100 A
Max. discharge current Imax 200 A
Max. discharge current Imax 10 kA
Total Maximum discharge current Imax Total 20 kA
Withstand on Combination waveform IEC 61643-11 Uoc 10 kV / 5 kA
Withstand on overvoltages IEEE C62.41.1 10 kV / 10 kA
Protection mode(s) Differential Mode
Protection level Up 30 V
Protection level Up 1.5 kV
Protection level L/N Up L/N 1.5 kV
Protection level L/PE Up L/PE 1.5 kV
Admissible short-circuit current Isccr 10 000 A
Network type AC/Data
Technology MOV+GDT
Connection to Network By screw terminal: 1.5mm² max.
Mounting On plate
Housing material Thermoplastic UL94 V-0
Operating temperature Tu -40/+85°C
Protection rating IP20
Failsafe mode Disconnection and AC continuity
Disconnection indicator Green LED OFF and remote signaling
Voltage/operating indicator Green Led ON
Remote signaling of disconnection yes : output on contact NO
Dimensions See diagram
Standards compliance IEC 61643-21 / EN 61643-21 / UL1449 ed.5
Thermal disconnector Internal
Installation ground fault breaker Type 'S' or delayed