Surge protector for LED lighting system Class 2

MLPM2-230L-R
Part Number 842211
MLPM2-230L-R
  • Type 2 (or 3) surge protectors for LED
  • For single phase 230 V network
  • Class 2
  • Very compact
  • Plate mounting
  • Spring terminal connection
  • Status indicator
  • End of life : AC Disconnection
  • EN 61643-11, IEC 61643-11 certified

The MLPM range is a series of AC surge protectors dedicated to LED lighting system. The MLPM are very compact to be integrated into luminaires by spring connexion terminal. This range is equipped with a mechanical disconnect indicator exclusive to CITEL.

Select another reference:

SPD type
2+3
Network
220-240 V Single-phase
AC system
TT-TN
Max. AC operating voltage
Uc 275 Vac
Max. load current
@25°C
IL 10 A
Temporary Over Voltage (TOV) Characteristics - 5 sec.
Without disconnection
UT 335 Vac withstand
Temporary Over Voltage (TOV) Characteristics - 120 mn
Without disconnection or with safety disconnection
UT 440 Vac disconnection
Residual Current
Leakage current to Ground
Ipe None
Nominal discharge current
15 x 8/20 µs impulses
In 5 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
Imax 10 kA
Withstand on Combination waveform IEC 61643-11
Class III test: 1.2/50µs - 8/20µs
Uoc 12 kV
Protection mode(s)
Differential Mode
Protection level L/N
@ In (8/20µs)
Up L/N 1.2 kV
Admissible short-circuit current
Isccr 10 000 A
Technology
MOV+GDT
Connection to Network
2 spring terminals opposite side in/out - wire 1.5mm² max.
Mounting
On plate
Housing material
Thermoplastic UL94 V-0
Operating temperature
Tu -40/+85°C
Protection rating
IP20
Failsafe mode
Disconnection and AC line cut-off
Disconnection indicator
1 mechanical indicator
Voltage/operating indicator
Mechanical
Dimensions
See diagram
Weight
0.026 kg
Standards compliance
EN 61643-11 / IEC 61643-11
Certification
KEMA
Thermal disconnector
Internal
Installation ground fault breaker
Type 'S' or delayed