Type 1+2+3 PV surge protector - CTC Technology

DPVN1-6CVGS-21Y-1200
Part Number 65222102
DPVN1-6CVGS-21Y-1200

NEW CITEL PV SPD

  • Type 1+2+3 surge protector for Photovoltaic
  • CTC Technology
  • VG Technology
  • Impulse currents Iimp/Itotal: 6.25/12.5 kA (10/350µs)
  • Common/Differential mode protection
  • Remote signaling
  • IEC 61643-31, EN 61643-31, EN 50539-11, UL1449 ed.5 compliance
  • Certified EN 61643-31 and IEC 61643-31
Contact Us
The DPVN1-VG is CITEL's new series of type '1+2+3' SPDs for photovoltaic applications. The development of these SPDs is based on two technologies, patented exclusively by CITEL. The 'VG Technology' guarantees total absence of leakage current and maximum reliability. Using 'CTC Technology', the DPVN1 incorporates a thermosensitive separation point placed at the center of the SPD, guaranteeing the safest disconnection on the market. The products are designed for DIN rail mounting. Compact and equipped with a fault indicator, these products are easy to install and maintain.
Select another reference:
SPD type
IEC 1+2+3
Network
 PV 1000 Vdc
Nominal PV voltage
 Uocstc 1000 Vdc
Max. PV operating voltage
 Ucpv 1200 Vdc
Residual Current
Leakage current to Ground
 Ipe None
PV Permanent Operating current
Current consumption at Ucpv
 Icpv None
Follow current
If None
Nominal discharge current
15 x 8/20 µs impulses
 In 20 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
 Imax 40 kA
Total Maximum discharge current
max. total withstand @ 8/20 µs
Imax Total 60 kA
Impulse current by pole
max. withstand 10/350µs by pole
 Iimp 6.25 kA
Total lightning current
max. total withstand @ 10/350µs
 Itotal 12.5 kA
Withstand on Combination waveform IEC 61643-11
Class III test: 1.2/50µs - 8/20µs
 Uoc 6 kV
Current withstand short circuit PV
 Iscpv 15 000 A
Connection mode(s)
 +/-/PE
Protection mode(s)
 Common/Differential mode
Protection level +/-
@ In (8/20µs)
 Up 4.3 kV
Protection level +/PE (-/PE)
@ In (8/20µs)
 Up 4.3 kV
Technology
 VG Technology (MOV+GSG)
Connection to Network
 By screw terminals: 2.5-25mm² (35mm²) / by bus
Format
 Compact monobloc box
Plugable
 No
Mounting
 Symmetrical rail 35 mm (EN 60715)
Housing material
 Thermoplastic UL94 V-0
Operating temperature
 Tu -40/+85°C
Protection rating
 IP20
Outdoor application
 No
Failsafe mode
 All pole disconnection from PV network
Disconnection indicator
 1 mechanical indicator - Red/Green
Remote signaling of disconnection
 Output on changeover contact
Max. Voltage/Current for remote signaling
 250 V / 0.5 A (AC) / 30 V / 3 A (DC)
Dimensions
 See diagram - 2.5TE (EN43880)
Weight
 0.440 kg
Standards compliance
 IEC 61643-31 / EN 61643-31 / EN 50539-11 / UL1449 ed.5
Certification
 KEMA
Thermal disconnector
 CTC Technology integrated
Back-up protection device
Without