Compact 3-phase+N Type 2 surge protector - 120 V - Pluggable
DS440S-230
Part Number: 311712
- Compact 3-Phase Type 2 surge protector
- In : 20 kA
- Imax : 40 kA
- Common mode
- Pluggable module
- Remode Signaling contact
- EN 61643-11, IEC 61643-11, UL1449 ed.4 compliance
Datasheet
The DS440 Type 2 surge protectors are compact devices designed to protect 3-phase+N networks at the main switchboard.
They provide a common or common/differential mode protection.
This SPD is based on high energy varistor equipped with thermal disconnectors and failure indicator to comply with standards.
The DS440 is DIN rail compatible and is built with a plug-in module and fixed base, which allows an easy and fast maintenance.
Select another reference:
| SPD type | 2 | |
| Network | 230/400 V 3-phase | |
| AC system | TN | |
| Nominal line voltage | Un | 230 Vac |
| Max. AC operating voltage | Uc | 255 Vac |
| Temporary Over Voltage (TOV) Charasteristics - 5 sec. | UT | 335 Vac withstand |
| Temporary Over Voltage (TOV) Charasteristics - 120 mn | UT | 440 Vac disconnection |
| Residual Current | Ipe | < 0.5 mA |
| Operating current | Ic | 0.5 mA |
| Follow current | If | None |
| Nominal discharge current | In | 20 kA |
| Max. discharge current | Imax | 40 kA |
| Connection mode(s) | L/PE and N/PE | |
| Protection mode(s) | Common mode | |
| Residuel voltage at 5 kA | Up-5kA | 0.9 kV |
| Protection level CM/DM | Up mc/md | 1.25 kV |
| Admissible short-circuit current | Isccr | 10 000 A |
| Technology | MOV | |
| SPD configuration | 3-phase+Neutral | |
| Connection to Network | By screw terminals: 1.5-10mm² (L/N) or 2.5-25mm² (PE) | |
| Format | Plug-in modular box | |
| Mounting | Symmetrical rail 35 mm (EN 60715) | |
| Housing material | Thermoplastic UL94 V-0 | |
| Operating temperature | Tu | -40/+85°C |
| Protection rating | IP20 | |
| Failsafe mode | Disconnection from AC network | |
| Disconnection indicator | 4 mechanical indicators | |
| Spare module(s) | DSM440-230 | |
| Remote signaling of disconnection | Output on changeover contact | |
| Dimensions | See diagram | |
| Weight | 0.238 kg |
| Standards compliance | IEC 61643-11 / EN 61643-11 / UL1449 ed.4 | |
| Certification | EAC |
| Thermal disconnector | Internal | |
| Installation ground fault breaker | Type 'S' or delayed | |
| Fuses | 50 A min. - 125 A max. - Fuses Type gG |
