1-pair DIN rail plug-in Data surge protector

Part Number: 6417024
  • 1-pairdataline/telecom surge protection
  • Local and Remote signaling of SPD status
  • DIN rail mounting, Spring connect status
  • Plug-in module
  • 1 monitoring module + SPD modules (up to 48) + bus
  • Discharge current Imax/In: 20 kA /5kA
  • Complies with IEC/EN 61643-21 and UL497A

DLA surge protectors are designed to protect, against surge voltages due to lightning, terminals equipment connected to industrial buses, telecom lines or datalines. These surge protectors must be installed on symmetrical DIN rail and are available for most of the transmission lines: line voltage from 6 to 170V, bitrate up to 10 Mbit/s. These products are 1-pair surge protectors with removable module for easy maintenance.

Select another reference:

Network RS232, RS485
Nominal line voltage Un 12 V
Max. DC operating voltage Uc 15 Vdc
Max. frequency f max. > 3 MHz
Insertion loss < 1 dB
Max. load current IL 300 mA
Max. discharge current Imax 20 kA
Line inductance No
Protection mode(s) Common/Differential mode
Protection level Up 30 V
Impulse current Iimp 5 kA
Nominal discharge current In 5 kA
Line/Line Nominal discharge current In L/L 5 kA
Line/Ground Nominal discharge current In L/PE 5 kA
Technology GDT+Clamping diode+PTC (thermal resistor) + Resistor
SPD configuration 1-pair+shielded
Connection to Network Spring terminal: cross section 0.5-2.5mm²
Format Plug-in DIN box
Mounting Symmetrical rail 35 mm (EN 60715)
Housing material Thermoplastic UL94 V-0
Operating temperature Tu -40/+85°C
Protection rating IP20
Failsafe mode Transmision cut-off - fault mode 2
Disconnection indicator Red light on
Spare module(s) DLATS1M-12D3
Remote signaling of disconnection Trough control module
Remote signaling of disconnection via control module Yes
Dimensions See diagram
Weight 0.066 kg
Standards compliance IEC 61643-21 / EN 61643-21 / UL497A