AC surge protector for LED Lighting system Class 1
Part Number: 831212
MLPC1-230L-R/50
- Type 2 (or 3) surge protectors for LED
- Class 1
- Very compact
- Plate mounting
- Spring terminal connection
- Status indicator
- Disconnection AC end of life
- EN 61643-11 compliance
Datasheet
|
SPD type
|
IEC | 2+3 |
|
Network
|
220-240 V Single-phase |
|
|
AC system
|
TT-TN |
|
|
Max. AC operating voltage
|
Uc | 320 Vac |
|
Max. load current @25°C
|
IL | 5 A |
|
Temporary Over Voltage (TOV) Characteristics - 5 sec.
Without disconnection
|
UT | 335 Vac withstand |
|
Temporary Over Voltage (TOV) Characteristics - 120 mn
Without disconnection or with safety disconnection
|
UT | 440 Vac disconnection |
|
Temporary Over Voltage N/PE (TOV HT)
Without disconnection or with safety disconnection
|
UT | 1200 V/300A/200 ms disconnection |
|
Residual Current
Leakage current to Ground
|
Ipe | None |
|
Nominal discharge current
15 x 8/20 µs impulses
|
In | 5 kA |
|
Max. discharge current
max. withstand @ 8/20 µs by pole
|
Imax | 10 kA |
|
Total Maximum discharge current
max. total withstand @ 8/20 µs
|
Imax Total | 20 kA |
|
Withstand on Combination waveform IEC 61643-11
Class III test: 1.2/50µs - 8/20µs
|
Uoc | 10 kV |
|
Withstand on overvoltages IEEE C62.41.1
|
10 kV / 10 kA |
|
|
Protection mode(s)
|
Common/Differential mode |
|
|
Protection level L/N
@ In (8/20µs)
|
Up L/N | 1.5 kV |
|
Protection level L/PE
@ In (8/20µs)
|
Up L/PE | 1.5 kV |
|
Admissible short-circuit current
|
Isccr | 10 000 A |
|
Technology
|
MOV+GDT |
|
|
Connection to Network
|
1 spring contact single side in/out - wire 1.5mm² max. |
|
|
Mounting
|
On plate |
|
|
Housing material
|
Thermoplastic UL94 V-0 |
|
|
Operating temperature
|
Tu | -40/+85°C |
|
Protection rating
|
IP20 |
|
|
Failsafe mode
|
Disconnection and AC line cut-off |
|
|
Disconnection indicator
|
LED green OFF and AC network cut-off |
|
|
Operating indicator
|
Green Led ON |
|
|
Dimensions
|
See diagram |
|
Standards compliance
|
EN 61643-11 / IEC 61643-11 |
|
|
Certification
|
IEC / TUV /IMQ |
|
Thermal disconnector
|
Internal |
|
|
Installation ground fault breaker
|
Type 'S' or delayed |
