AC surge protector for LED Lighting system Class 1

MLPC1-230L-V/2L
Part Number 831225
MLPC1-230L-V/2L
  • Type 2 (or 3) surge protector for Class I LED Lighting
  • AC surge protection for 2-Phase + Neutral network
  • Compact dimensions
  • Screw connection
  • Max. discharge current 10 kA
  • Certified IEC 61643-11

The MLPC range is a comprehensive series of AC surge protectors dedicated to LED lighting system. The MLPC are very compact to be integrated into luminaires and are available 2 modes of connection (screw terminal or spring).


SPD type
2 (or 3)
Network
2-phase + N 230 V
AC system
TT-TN
Max. AC operating voltage
Uc 320 Vac
Max. load current
@25°C
IL 5 A
Temporary Over Voltage (TOV) Characteristics - 5 sec.
Without disconnection
UT 335 Vac withstand
Temporary Over Voltage (TOV) Characteristics - 120 mn
Without disconnection or with safety disconnection
UT 440 Vac disconnection
Residual Current
Leakage current to Ground
Ipe None
Nominal discharge current
15 x 8/20 µs impulses
In 5 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
Imax 10 kA
Withstand on Combination waveform IEC 61643-11
Class III test: 1.2/50µs - 8/20µs
Uoc 10 kV / 5 kA
Protection mode(s)
L1/N, L2/N and N/PE
Protection level L/N
@ In (8/20µs)
Up L/N 1.5 kV
Protection level N/PE
@ In (8/20µs)
Up N/PE 1.5 kV
Admissible short-circuit current
Isccr 10 000 A
Connection to Network
By screw terminal: 1.5mm² max.
Mounting
On plate
Housing material
Thermoplastic UL94 V-0
Operating temperature
Tu -40/+85°C
Protection rating
IP20
Failsafe mode
Disconnection, Green Led OFF and power cut off
Disconnection indicator
LED green OFF and AC network cut-off
Voltage/operating indicator
Green Led ON
Dimensions
See diagram
Weight
0.057 kg
Standards compliance
IEC 61643-11 / EN 61643-11
Certification
KEMA
Thermal disconnector
Internal