Combined AC/Dataline surge protector for LED lighting system Class 1

Part Number: 833223
  • Type 2 (or 3) surge protector for Class 1 LED Lighting
  • Combined AC/Dataline surge protection
  • DALI, DMX, RS485, 0-10V datalines compliance
  • Shield wire management
  • Optimized coordination with driver
  • Compact dimensions
  • Screw connection
  • Max. discharge current 10 kA
  • IEC 61643-11 and IEC61643-21 compliance

The MLPCHx-V/DL surge protectors have been designed to protect single-phase DALI-powered equipment. Designed for optimum coordination with the driver, the range offers an excellent performance ratio. The products can be used as Type 2 + 3, thanks to their very compact design and their maximum discharge capacity of 10 kA per pole. Connection is via opposing screw terminals (MLPCHx-230L-V). The products comply with IEC 61643-11 and IEC 61643-21.

Network 230 V single-phase
AC system TT-TN
Max. AC operating voltage Uc 320 Vac
Max. load current IL 2.5 A
Temporary Over Voltage (TOV) Charasteristics - 5 sec. UT 335 Vac withstand
Temporary Over Voltage (TOV) Charasteristics - 120 mn UT 440 Vac disconnection
Residual Current Ipe None
Nominal discharge current In 5 kA
Max. discharge current Imax 10 kA
Withstand on Combination waveform IEC 61643-11 Uoc 10 kV / 5 kA
Protection mode(s) Common/Differential mode
Protection level L/N Up L/N 1.5 kV
Protection level N/PE Up N/PE 1.5 kV
Admissible short-circuit current Isccr 10 000 A
Technology MOV+GDT
Connection to Network By screw terminal: 1.5mm² max.
Mounting On plate
Housing material Thermoplastic UL94 V-0
Operating temperature Tu -40/+85°C
Protection rating IP20
Failsafe mode Disconnection, Green Led OFF and power cut off
Disconnection indicator LED green OFF and AC network cut-off
Dimensions See diagram
Weight 0.056 kg
Standards compliance IEC 61643-11 / EN 61643-11 / UL1449 ed.5